Monitor engine oil, air ride, fuel, or coolant system pressure with this sensor connected to one of the P3 Gauge’s analog input wires (brown for Analog 1, blue for Analog 2).

The sensor outputs a linear 0-5V signal, which the gauge reads and displays as pressure. You must hardwire the sensor to the appropriate analog input on the gauge harness.

 Specifications: - 0-150 PSI range - 5 volt operation (do not use 12V power) - 1/8" NPT fitting - 10" wiring harness with 3-wire connection.

• Red - 5 volt power supply (can be sourced from purple wire on P3 harness)
• Black - Chassis ground
• Green - Signal output (routed to brown or blue wire on P3 harness)

To use with the P3 Gauge, simply select the "PS" (pressure sensor) option for one of the two universal analog inputs.